Low weight and generous runtime makes Stinger Electric the new generation rental kart. This kart has fantastic acceleration and is very easy to drive. Zero emissions and low noise level makes this kart the perfect choice for indoor tracks och tracks in urban areas.
Our new Stinger Electric has the most modern technology with brushless, synchronous permanent magnet disc rotor engines in combination with LiFePO4 batteries. This is today the most common combination for modern electric vehicles where high efficiency, low weight, small size and long range are important parameters.
This technology is completely free from maintenance and both speed and torque is adjustable. The speed is decisive for this kind of application where it’s crucial that the karts keep the same speed.
Driving time on a fully charged lithium battery is approximately 35 minutes under perfect conditions on an indoor track. Important parameters is the ambient temperature, the life-span of the battery, it’s status and it’s charge condition. A high quality lid battery, 75 Ah, gives 15-18 minutes runtime. Compared to a lid battery, the charging time for lithium batteries is faster, the amount of cycles is 2,5-3 times more and the weight is about 1/3.
In order to achieve longevity for the battery we recommend avoiding longer runtime then 18-20 minutes before the battery is recharged. The battery should never reach a level under 20% before it’s recharged.
|Protection frame||CRMO 30mm, mounted on silent blocks||Extra protection pipes, PEHD frame.
Extra protection PEHD spoiler and rear protection
|Adjustable chair||Yes, mounted on silent blocks||–|
|Seat||Tillett plastic||Fully or ¼ upholstered Tillett|
|Seat reduction||No||SRS rubber|
|Safety belt||No||2- or 4-point|
|Flooring||PEHD/aluminium. Ergonomically shaped, covers wires, hoses and tie rods.||–|
|Steering column||Spring mounted, energy-absorbing||–|
|Tires||Duro||Can be delivered with most brands|
|Front wheel||Monolithic, reinforced aluminium 120mm. 20mm bearings, machined||–|
|Rear wheel||Rear wheel Monolithic, reinforced aluminium 180mm, machined||–|
|Steering knuckle||20mm. Axis in special hardened steel||Eccentric washer, adjustment camber/caster angle|
|Rear axle||30mm, massive||950 mm|
|Axle bearings||3pcs, mounted in split housing||–|
|Brake||Self adjustable hydraulic||2-circuit hydraulic|
|Brake disc protection||No||Yes|
|Rear protection||Yes, PEHD||–|
|Engine||PMS 120 5,5kW 48V 3000RPM 17Nm Peak moment (torque): 40 Nm, peak effect (power): 12,5kW. Battery, GBS LiFePo4 48V/60 Ah incl BMS||–|
|Charger||HF 48V 100A||–|
|Weight boxes||No||Yes, 27kg|
|Size||L: 1920mm. x W: 1300mm. x H: 600mm.||–|
|Weight||Apx 195 kg||–|